EUROGRIND SUPERABRASIVES Produces Resin Bond Diamond Wheels that are used for maximum performance which reduces production time and increases profits. These wheels help in cutting and grinding various materials efficiently.​​

Using resin bond diamond grinding wheels leads to diminished grinding force, less heat caused by grinding, good self-sharpening, high efficiency, and higher-finish quality. Diamond wheels are used to cut, finish grind, semi-finish grind, sharpen, and polish.​

It can evenly distribute the bond on abrasives and hold the abrasive grains into the resin bond diamond grinding wheel. And it can firmly bond to the matrix. This can prevent the abrasive grains from falling off easily in the early stages and prevent bond separation.​

Since resin bonds are elastic and brittle, they are self-sharpening and do not block, but they have poor wear resistance. Therefore, resin bond diamond wheels will have high grinding efficiency with high wear resistance as long as they satisfy the surface roughness requirement. ​

If the resin bond of the grinding wheel is not heat resistant, it will consume quickly and result in wheel cracks and burns because of the high grinding heat. When dry grinding, the feed amount should be kept as small as possible to improve durability. Wet grinding with coolant increases the durability of a grinding wheel.​It is a direct relationship between the bond strength and the grinding efficiency, consumption, workpiece quality, and safety performance of the grinding wheel.